Barska BE11642 Elite Edition Metal Detector Manual do Utilizador

Elite Edition Metal Detector LCD Display—probable type of metal, depth of the target, operating mode and low battery indication Three Tone Audi

10 2. SETTING THE OPERATION MODE The detector comes with three operating modes ALL METAL, DISC, NOTCH. You can select the desired mode by relative

11 4. Adjust the search coil so the flat part points towards the ceiling. 5. Slowly sweep a sample of the material you want the detector to find (s

12 Search Coil Sweeping Hints: • Never sweep the search coil as if it were a pendulum. Raising the search coil while sweeping or at

13 Note: In order to detect the target deeply buried, you can adjust the SENS to a high position. But do not set the level of SENS to Max positi

14Factors That Affect The Detecting It’s difficult to have an accurate detecting result. Sometimes the detecting may be restricted by some

15 CARE AND MAINTENANCE Your metal detector is an example of superior design and craftsmanship. The following suggestions will help you

BC192

Operates on two 9-volt alkaline batteries (not supplied). CONTENTS Features……………………………………………………………………... 3 Preparation Assembling the detecto

3 With your metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. The detector is versatile and

4 TREASER HUNTER’S CODE OF ETHICS A few basic rules you should follow while using your detector • Always get permission before searching any sit

52. Unscrew the knob on the sea rch coil and remove the knob connec tor.Insert the s tem and align the holes on the search coil bracket and the stem.P

6 1. Slide the POWER button to turn on the power. 2. Slide the left and right battery covers off in the direction of the arrow. 3. Place a 9V batte

7 FUNCTIONS AND INDICATIONS 1. Parts Of The Control Box 2. DISPLAYS The indicator of target includes target icons and LCD displays and is located

8 • Since the indications are approximations, the detector might not have actually found the item it indicates. The indicator is

9 TONES If the detector is set to the ALL METAL target mode, it sounds a single tone when it detects any type of metal. If you